elearning

We provide you a set of elearning tutorials to help you start practising with GO2cam.

Those tutorials do not replace face-to-face trainings, that are mandatory to learn GO2cam properly.

It will get you familiarized with GO2cam User Interface and understand a standard process of workpiece programming. We advise you to use headphones to follow audio explanation.

Also note that french subtitles can be displayed from bottom bar of video player.

The tutorials introduced below are likely to be a little different than what you can experience in the software. This is because those videos have been produced in older versions than the latest GO2cam version.

Fundamentals Tutorials

These 2 videos are common to all the technologies and products.

In GO2cam Demo version, the *.PCE files needed for those videos are in GO2cam_Intl>GO2camV611>data.

Either, you can download them here: 00_Intro_Parts.zip

Graphic User Interface

Duration: 13 minutes

Get acquainted with GO2cam Homepage, menus and toolbars, systems of axis and display options.

Machining Tips

Duration: 11 minutes

Discover the machining process, filtering bar, machining tree and simulation command.

https://vimeo.com/715107254?share=copy

https://vimeo.com/715089031?share=copy

For some of the milling and turning tutorials coming next, *.step files may be needed for the practise: they are present in the directory GO2cam_Intl>GO2camV611>ascii. Other files may be necessary to complete the tutorials, all the data can be downloaded here: 0-Tutorials_Data.zip

Milling Tutorials

Wireframe Design_Plate Fixture

Duration: 20 minutes

Wireframe design
Stock creation
Machining operations applied on wireframe: Facing, pocket, contouring, holes operations
G-codes
Geometry modification and machining update

https://vimeo.com/858551949?share=copy

Solid Import_Cover

Duration: 22 minutes