Control of the Threading Points
Definition: the purpose of this option is to control the wire threading points by comparing the simulated threading points to the user threading points.
 In the Options of simulation, you can uncheck the Control of the Threading if you don’t want it to be displayed. |  |
During simulation, all the points for all the passes are displayed as a list in the Information window.
This list is analyzed, similar points are compared and the final list is displayed.
Finally, this list is compared to the threading points created by the user, if they do not correspond, the message ‘Undefined Threading Point’ is displayed. In that case, a mistake has probably been done.
Here is an example:
4 profiles are machined (P1 to P4), 3 straight cutting passes are programmed (partial, micro slug bis, complete).
All the points where the wire is cut are listed (*** Control of Threading Points***). These points are 12, 3 passes for 4 profiles.
They are compared with each other and cancelled if they are similar.
The resulting points are compared to the threading points created by the user. The list is displayed (*** List of Threading Points***)
****** Control of Threading Points ****** Threading Number 1 : X = 7.00, Y = 23.00 of the cycle : Straight Cut Partial P1 Threading Number 2 : X = 15.00, Y = 20.25 of the cycle : Straight Cut Partial P2 Threading Number 3 : X = 18.00, Y = 14.50 of the cycle : Straight Cut Partial P3 Threading Number 4 : X = 12.00, Y = 7.00 of the cycle : Straight Cut Partial P4 Threading Number 5 : X = 12.00, Y = 7.00 of the cycle : Straight Cut Micro Slug Bis P4 Threading Number 6 : X = 18.00, Y = 14.50 of the cycle : Straight Cut Micro Slug Bis P3 Threading Number 7 : X = 15.00, Y = 20.25 of the cycle : Straight Cut Micro Slug Bis P2 Threading Number 8 : X = 7.00, Y = 23.00 of the cycle : Straight Cut Micro Slug Bis P1 Threading Number 9 : X = 7.00, Y = 23.00 of the cycle : Straight Cut Complete P1 Threading Number 10 : X = 15.00, Y = 20.25 of the cycle : Straight Cut Complete P2 Threading Number 11 : X = 18.00, Y = 14.50 of the cycle : Straight Cut Complete P3 Threading Number 12 : X = 12.00, Y = 7.00 of the cycle : Straight Cut Complete P4 ****** List of Threading Points ****** Threading Point 1 : X = 7.00, Y = 23.00, Ø = 1.00, Absolute Depth = 7.88 Threading Point 2 : X = 18.00, Y = 14.50, Ø = 1.00, Absolute Depth = 7.88 Threading Point 3 : X = 12.00, Y = 7.00, Ø = 1.00, Absolute Depth = 7.88 Threading Point 4 : X = 15.00, Y = 20.25, Ø = 1.00, Absolute Depth = 7.88 |