Revisions - Fix for GO2cam V6.12
Revisions are GO2cam versions mainly dedicated to fix software issues and released approximatively once a month. This page shows the complete list of fixed issues, revision by revision.
Improvements are given in another page: Revisions Improvements.
V6.12.203 | Fixed Issues | 29 April 2025 |
Information for Resellers | In the Web Portal, VAR Licence has now access to PP category in chatbot. |
Information for Resellers | New direct access to Post-processors online help from PostPro Builder |
Information for Resellers | PCALL/ICALL and RCALL functions are now hypertext link that can be clicked to access the online PP help |
Solid Import | We fixed a wrong solid recovery.
GO2SUP-9958 / GO2SUP-10360 |
User Interface | Inch unit: we fixed an issue in the display of tool for automatic holes features |
Machine File | None of the fields related to PP was saved in the machine for any post processor.
GO2SUP-10676 |
Standard Holes | When tapping depth exceeds drilling depth, the drilling value is automatically updated to remain longer than tapping.
GO2SUP-6978 |
Standard Holes | Some Holes Features applied in V6.09 parts were inverted while opening the part in V6.12. We fixed it.
GO2SUP-10544 |
Profiles | A problem of compatibility with old profiles has been fixed (problem with start and end points)
GO2SUP-10543 |
2 Axis Milling | Fixed issues in the Contour Rework toolpath.
GO2SUP-10542 |
Layout Design | Dimensions were sometimes not correctly displayed in planes other than reference plane
GO2SUP-10515 |
Stock | Stock computing was wrong in turn finishing operation.
GO2SUP-10514 |
Vericut Export | Fix export Tap tool to Vericut
GO2SUP-1363 |
Vericut Export | Exporting a part after return was not correct; it is improved for 6.12.203.
GO2SUP-644 |
Data Export | Default exchange directory for NCsimul, Vericut and makino is now User configuration directory (ie : C:\Users\John\AppData\Local\GO2cam\6.12). |
User Interface | Machine packs can now be saved in other directories than default. |
4 Axis EDM | Approach and return points are visible only when selecting geometry selection icon.
GO2SUP-10295 |
Standard Holes | We fixed an issue in the display of holes toolpaths.
GO2SUP-10143 / GO2SUP-10314 |
User Interface | Improvement of grid display performance
GO2SUP-9750 |
User Interface | Fixed, we allow the grid to be used in face-oriented selections, such as definition of origin in the Automatic Solid Import.
GO2SUP-9742 |
Texts | We fixed an issue occuring while reading texts from V6.10 files.
GO2SUP-9594 |
Machine File | Fixed, a bug where collet wasn't indexable. Also, in the machine file it is now possible to define indexing chuck when Collet mode is selected.
GO2SUP-9540 |
User Interface | Fixed, display of safety area plane in turn contexts
GO2SUP-2459 |
Swiss Machining | Issue fixed in the definition of zero point after transfer to subspindle
GO2SUP-9247 |
3 Axis Milling | In Z Level, sometimes Flat Faces were reworked even with option set to NO.
GO2SUP-4709 |
Mesh Design | Mesh silhouette of projection works properly, even at a specific altitude. |
3 Axis Milling | A collision occuring in the Finish operation has been fixed.
GO2SUP-9522 |
Machining Generalities | Table of origins: if an operation is programmed on a plane and has a special origin defined in the table of origins, and if a new operation is programmed on the same plane, we apply the same origin to this new cycle.
GO2SUP-8678 |
Solid Design | Complex silhouette computing are better with new Parasolid patch.
GO2SUP-8323 |
GO2SW | Updating Solidworks model now display configs list. Note that only 1 config is selectable at that point. For the initial import it is possible to select several configs in order to load stock from another config
GO2SUP-7192 |
Toolpaths | Improve stabilty of 2D toolpath computation
GO2SUP-6387 |
3 Axis Milling | In some cases, the retract mode 'Altitude+Safety Distance' was not considered and all the retracts were done at Safety Plane; we fixed it.
GO2SUP-1385 |
V6.12.202 | Fixed Issues | 25 March 2025 |
User Interface | Fixed an issue in performance of the display of big cycles. |
Solid Import | Improvement of display priority while picking the origin: the stock had priority compared to other geometry and not anymore. |
Machining | While defining a 'Part Setting', the list of planes was not available!
GO2SUP-9730 |
Workplane | While opening PCE files from former version, sometimes the orientation of planes was completely modified from original file. We fixed this serious issue.
GO2SUP-8977 |
MTE | In turning, there was a wrong computing of origin in case of multiple origins.
GO2SUP-8467 |
Stock | Altitude calculation on a mesh stock sometimes freezes or crashes, we improved it. |
Symbols | Fix a display issue of system of axis on symbols |
Machining | We fixed a bug in the Tracing of machining vectors for simultaneous machining |
Post-Processors | A Post-Pro Builder crash while using AI has been fixed |
User Interface | Print Preview could not display axis and unlimited lines |
CAD Import | Fix bug of STEP import |
Stock | Stock computation in developed plane has been improved |
Developed Plane | We fixed a crash while creating a developed plane |
Turning | The Return Part command used to create an axial plane with the Z axis inverted: fixed. |
