Revisions - Fix for GO2cam V6.11

V6.11.210

Fixed Issues

21st of January 2025

3 Axis Milling

Top Z altitude was not respected in a 3 axis Facing operation: we fixed it.
GO2SUP-7467

Turning

While drilling with tool excentration, a wrong offset in X+ was computed, we fixed it.
GO2SUP-7298

Symbols

Symbols defined in a plane different from reference plane were not correctly exported.
GO2SUP-7039

3 Axis Milling

Isoparametric: allowance on Stop Face was not correctly computed, we improved it.
GO2SUP-7113

Holes

We fixed a bug in the assignment of holes while using the command 'Transformation into holes'.
GO2SUP-7196

MPM

Mistake while reading the tool numbering from PCE file to MPM mounting: fixed.
GO2SUP-7289

Layout Design

In automatic layout of a solid, some hidden lines were not drawn with dotted lines but plain lines
GO2SUP-7312

3 Axis Milling

Rough/Rework was not able to proceed a reworking operation in some situations, generating a error -1 message and the cycle was put in warning status.
GO2SUP-6972 /GO2SUP-7151 / GO2SUP-7436 / GO2SUP-7629

Holes

Standard and Users Holes: the subtraction of holes was not possible in case of multiple solids. The behaviour has been improved thanks to a new combo box. You can now select the solid body where to create the boolean operation and switch to another solid body if necessary. If you do not want to apply subtraction, simply select 'No part body'.
GO2SUP-5892 / GO2SUP-6286 / GO2SUP-7205

V6.11.209

Fixed Issues

10th of December 2024

Turning

Multiples NC files for a part with a part rework: if the part rework had a special set number, the origin for the operations after part rework was wrong! It is now correct, we use the origin of rework plane.
GO2SUP-6690

Holes Features

While editing a hole feature, the name was not correctly displayed.
GO2SUP-6728

Simulation

Simulation of 3-axis deburring programmed with Y axis was still using C axis rotation. We fixed this.
GO2SUP-6758

Holes Features

We fixed an issue while creating the subtraction of a hole feature in a solid.
GO2SUP-6880

4 Axis Simultaneous

Missing toolpaths in the cycle, we fixed it.
GO2SUP-5917

Milling

Pocket cycle: the value 'Thickness' defined in an opelist was not kept while applying the opelist.
GO2SUP-6551

Wire EDM

When we create a geometrical plane in Wire EDM, the Z direction is now correctly shown by the system of axis at the right bottom of the screen.
GO2SUP-6509

Solid Design

Several improvements in Solid Design: issue fixed while defining radius 2 of solid torus, improvement in the process of creation of sphere and cone.
GO2SUP-6504

Texts

Better set anchor points on texts without history
GO2SUP-6503

Stock

We fixed a wrong stock computing after milling features
GO2SUP-6392

Workshop Documents

The export of 'Customized Documents' (layout sheets) was not working; fixed in 6.11.209
GO2SUP-6187

MTE Turning

We fixed the positioning of stock in the Main Spindle after Part Reworking.
GO2SUP-6405

Milling

The first origin offset was not taken into account by NC output, when we were without MTE. This is now solved in release 209.
GO2SUP-6099

Stock

We improved stock computing for a back chamfering operation.
GO2SUP-5307

V6.11.208

Fixed Issues

05th of November 2024

Tools

Library: the selection by “Used tool” was present only if Fixed tools were also present.

Tools

Library: when filtering by 'Tool Name', the search operators were wrong in some situations.
GO2SUP-5939

Milling

Fixed crash in plunge contouring on the oblong geometry with option toolpath no collision.

3 Axis Milling

3D Finish Contour: we fixed a bug of toolpath discontinuity.
GO2SUP-6128

CAD Import

The size of dimensions was much too big while importing a DXF file in inch: fixed.
GO2SUP-6057

Turning

The option to design parts either at diameter or radius was available only in the TurnMill product. We added it in all the turning packages.
GO2SUP-5898

Holes Features

We enhanced error management when creating standard hole; if drilling diameter is bigger that diameter then hole can't be created.
GO2SUP-5892

3 Axis Milling

After replacing the solid machined by another with 'Add CAD file', the list of altitudes was not correctly recognized in the machining cycle.
GO2SUP-5308

Turning

We fixed an issue of stock computing with millyuGO and reaming operations in subspindle.
GO2SUP-5874

Wire-Cut EDM

Fix issue in curve discretization in some Wire EDM cycles.
GO2SUP-5937

3 Axis Milling

Isoparametric toolpath changed direction while machining 2 different faces, we fixed it.
GO2SUP-6137

3 Axis Milling

Roughing/Reworking: too many toolpaths was done according to the real remaining stock, we reduced it.
GO2SUP-6135

MTE

We fixed a bug of MTE simulation where the turnyuGO toolpath was badly interpreted and caused a fake collision.
GO2SUP-5798
GO2SUP-6069

3 Axis Milling

Facing cycle had overcut in one workpiece, that was fixed.
GO2SUP-5537

Layout Design

The Geometric Tolerance command had some graphic display issues due to the font used.
GO2SUP-5534

Post-Processor

Wire-Cut EDM

Decomposition of arcs with center (IJ) did not work correctly, we fixed the issue.
GO2SUP-5795.

Post-Processor

Wire-Cut EDM

PP option 'mini arc length' with a big value did not decompose arcs in G01; it works now.

GO2SUP-5795

Wire-Cut EDM

The Single origin on the stock in Wire EDM is only in X and Y. We can pick a Z position on the part but it will be automatically projected to Z0.

GO2SUP-5409

Wire-Cut EDM

The feedrate from the technology page is shown in the coordinate information's window of the simulation. it was before always at 0.
GO2SUP-5409

Holes Features

We fixed an issue of length while defining Tap blind holes.
GO2SUP-5326
GO2SUP-5562

CAD Import

We fixed incorrect reading of holes files.
GO2SUP-5304

MPM

Computing with 'Real angles' in the machine was not correct in MPM, it is ok now.
GO2SUP-5300

CAD Import

We fixed a bug occuring while importing a SolidWorks native file (*.SLDPRT).
GO2SUP-5235

Milling

Fix issue in Facing cycle. Some toolpath could miss in some situation.
GO2SUP-5180

Milling

Finish Contour: we fixed an bug of missing rapid motion in a Finish Contour operation done in continuous path.
GO2SUP-5063

Milling

Fix issue in contouring cycle, some arcs were excluded from profiles
GO2SUP-4816

V6.11.207

Fixed Issues

01st of October, 2024

Stock

In some cases, editing the stock crashed the software! We fixed this bug.
GO2SUP-5632 / GO2SUP-5719

Turning

Synchronized roughing: when using two different tools, it was impossible to set channel for second tool in some cases. It has been fixed.
GO2SUP-5524

MTE

When a multi tool holder was moved, some tool information were not updated. It has been fixed.
GO2SUP-5503

Boring Head

We fixed an issue in the machine file; the type of machine file available was wrong. It was only possible to load *.MCT files (Turning!)
GO2SUP-5438

Graphic User Interface

Control command: when modifying the diameter of a solid cylinder with 'Distance Cavity', the modification was applied on radius instead of diameter.
GO2SUP-5366

Simulation

Comparison : in turning module, some symbols (clamps or chucks) freeze the computation. It has been fixed.
GO2SUP-5176

Wire-Cut EDM

Creating threading points on multiple profiles with a selection box was not working properly, we fixed it.
GO2SUP-5150

Milling

Contouring: the start point was diffeerent from preview in some cases; we fixed this issue.
GO2SUP-4924

Milling

Contouring: the management of collisions did not take into account a clamping element ; fixed.
GO2SUP-4439

4 Axis Simultaneous Milling

4 Axis Simultaneous Roughing: the toolpath generated overcuts on the part, it has been fixed.
GO2SUP-5061

Vertical Lathe

In Design, in the Parallel Profile command, we fixed the preview, which was inverted.
GO2SUP-5111

Graphic User Interface

Tools>Options: feed displayed format is now matching with precision set in Units options.
GO2SUP-5056

Wireframe Geometry

It was impossible to create a parallel line at 0mm (to create line superposed to axis!), we fixed it.
GO2SUP-4939

Workshop documents

Standard workshop document can now be generated in Chinese.
GO2SUP-4844

Wire-Cut EDM

Part analysis: in some cases, the profile was not created on hole. It has been fixed.
GO2SUP-4516

3 Axis Milling

Roughing / Reworking operation : better stock management to avoid air cutting.
GO2SUP-4184

CAD Import

STEP import : enhance import of step file that failed before.
GO2SUP-4208

V6.11.206

Fixed Issues

03 of September, 2024

Wire-Cut EDM

We fixed a bug in the recognition of a taper profile on solid.
GO2SUP-5084

Turning

Finish Groove : In some cases with mutliple grooves, the toolpath was not continuous. It has been fixed.
GO2SUP-4749

Clamping

Problem to save parameter of offset in "Setting part and fixture". It has been fixed.
GO2SUP-4712

Turning

Form Finishing :when use forming tool to face the part, the update of stock was wrong. It has been fixed.
GO2SUP-4676

Geometry

Text : Old ".asc" font are converted when imported. Engraving cycles can be reexecute. The size of text can be affected by conversion.
GO2SUP-4644

Holes Recognition

Imperial : hole recognition display diameter in mm instead of inch. It has been corrected.
GO2SUP-4636

Milling

When using the same tool in 2 consecutive operations, the retract to rapid plane between them was not correct and a collision had occured: fixed.
GO2SUP-4632

Files

Transfer part from turning to milling module has been corrected to work properly.
GO2SUP-4623

MTE simulation

An issue of wrong positioning after 90° indexing is fixed
GO2SUP-4619

Turning

Stock: when editing the stock to define it by clicking a solid model, this solid was not taken into account for computing! We fixed it.
GO2SUP-4617

Wire-Cut EDM

The diameter of holes created on threading points was not recognized for automatic holes operation in milling module. It has been fixed.
GO2SUP-4529

Wire-Cut EDM

The direction for threading points is not forced anymore on profiles that are not circles if set to ‘only circles’.
GO2SUP-4528

User Interface

Cutting conditions was not found for "Shape" cycles. It has been fixed.
GO2SUP-4521

Swiss Machining

S69_Tornos : correction of default synchro number in DPP to avoid MTE simulation issue. The NC output with standard of S69_Tornos is kept.
GO2SUP-4500

Turning

We fixed an issue of recomputing toolpath after editing geometry
GO2SUP-4614

Turning

Fixed, Revolver turrets on B Axis if the turret is under the work position
GO2SUP-4397

Geometry

Display of taper profiles in products other than EDM.
GO2SUP-4469

Turning

Fixe some missing approach toolpath in turning cycle when tool goes in rapid inside pocket.
GO2SUP-4462

Stock

Edit Stock: in the case of trouble with the stock, we can now systematically edit it to be able to recreate it properly.
GO2SUP-4450 / GO2SUP-3181 / GO2SUP-3589

Boring Head

Fixed the views using the interactive compass for boring head module.
GO2SUP-4421

Turning

Fix a wrong stock calculation for threading operation with milling tool on turn module.
GO2SUP-4398

3D Milling

3D Rework operation : In some case the stock used to compute reworking operation was wrong. It has been fixed.
GO2SUP-4318

User Interface

Fix a display issue in opelist parameters between general and specific parameters when they have the same label.
GO2SUP-4272

User Interface

Fix an input issue in spinbox when enter a computation.
GO2SUP-4271

Milling

Threading : External threading with taper angle was wrong. The cone was created like internal. It has been fixed.

Wire-Cut EDM

We fixed a bug in the nesting in Wire-edm
GO2SUP-4137

Milling

Fixed: wrong Z start altitude of a continuous contouring done with a Side and Face Mill Cutter.
GO2SUP-4078

Turning

Groove creation : The values D and G were inverted in "Cutomized Settings" array It has been fixed.
GO2SUP-4074

3D Milling

Shape finishing : correction of bad toolpath when use constant scallop option.
GO2SUP-4060

Opelists

Automatic reference with face color can miss some faces during selection. It has been fixed.
GO2SUP-4014

Layout design

Some edges were missing in ISO view projection. It has been fixed
GO2SUP-4007

Developed Plane

Correctly display toolpath in developped plane operations.
GO2SUP-3995

Probing

When use probing alignement of part with method Top angle X or Top angle Y, we don't get the right information in postprocesor. It has been fixed. Think about reexecuting machining to fix on existing part.
GO2SUP-3979

Stock

For chamfering cycle the stock was not updated properly in some cases. It has been fixed.
GO2SUP-3965

MTE Simulation

Fix issue when use operation copy after pull bar operation.
GO2SUP-3958

3D Milling

Finish Contour (Shape) generated unwanted loops in some corners: fixed
GO2SUP-3867

Milling

Pocket Rework: fixed an issue while inputting a negative value in 'Stock left in roughing'
GO2SUP-2513

5 Axis

5 axis swarf dual profile : computation has been improved to have better result.
GO2SUP-2303

Eureka Export

We fixed the export of some turning tools export to Eureka.
GO2SUP-4040

MTE Simulation

Correction of MTE simulation when option "Rotation" is selected in the hole geometry selection. In some case it can be wrong.
GO2SUP-3689
GO2SUP-3236

Simulation

Fixed, improper system interruptions forbidding a button click in dynamic simulation.
GO2SUP-1010

Milling

Back chamfering with woodruff cutter was optimized.
GO2SUP-322

MTE Wanago

The tool mounting number was incorrect, we fixed it.

V6.11.205

Fixed Issues

02 of July, 2024

Topic

Issue

MTE

Fixed an issue in preview of planes in MTE tooling, when there is only one possible position.
GO2SUP-3886

Turning

Fixed, correct stock cleanup on return operation
GO2SUP-3834

Features

The color of holes was not taken into consideration in case of 'Force the colour of holes for assignment' was checked on.
GO2SUP-3751

Features

In the option Feature Tool search of opelist, selection of 'Cutting Material' was not working correctly.
GO2SUP-3710

Wire EDM

We improved the solid recognition of profiles in case of multiple Z altitudes.
GO2SUP-3941

Wire EDM

Correctly sets threading points from existing geometry with too large research distance
GO2SUP-3908

Stock

We fixed an issue in the stock calculation for inverted single-angle tools
GO2SUP-3695

Turning

While importing a workpiece and its stock, the stock was not assigned correctly: fixed.
GO2SUP-3630

Turning Post-Processing

The option 'Output Stock for CNC simulation' was not taken into account in previous versions.
GO2SUP-3600

Holes in Turning

It was not possible to select cylinders as hole when the solid was created by revolution tool in turning plane. It's now possible.
GO2SUP-3590

Turning

Correction of B positioning in turning for return part.
GO2SUP-3527

Milling

Machining update was not complete: fixed.
GO2SUP-3476

3 Axis Milling

Contour morphing operation was not respecting the profile of limitation: fixed.
GO2SUP-3468

Design

Fix a problem when edit length of segment. In some cases the value was set to 0.
GO2SUP-3610

Simulation

Some clashes were improperly displayed in dynamic simulation, this is now fixed
GO2SUP-3231

Turning

Fix some error of reexecution of turning profile when face is deleted from the solid.
GO2SUP-679

MTEMilling

Some movements were improperly simulated in MTE, this issue is now fixed.
GO2SUP-180

V6.11.204

Fixed Issues

28 of May, 2024

Topic

Issue

Automatic Import

Fix: Setting stock origin in import process (GO button) leads to error in stock reexec

3 Axis Milling

Stop Surfaces of Isoparametric operations were not taken into consideration; fixed.
GO2SUP-3420 / GO2SUP-3467

MTE

Collision between stock and machine was not detected: fixed.
GO2SUP-3395

2 Axis Milling

The Clevis cycle was not reducing the feedrate as it should have done; fixed.
GO2SUP-3359

Turning Design

We fixed an issue in the calculation of through holes
GO2SUP-3342

Turning

Fixed, correct stock position after an operation of parting then a return on machines with only one chuck.
GO2SUP-3324

Holes

Standard Holes: defining smooth holes with quality did not work correctly. The list of operations defined in 'default_opelist.csv' were not taken into consideration. We also modified the behaviour by disabling quality and tolerance fields; simply enter 10H7 and the calculation will be done automatically.
GO2SUP-3245

2 Axis Milling

Gundrilling: parameters 'Reduced feedrate' and 'Spindle speed reduced' did not accept any value!
GO2SUP-3241

Stock

Bar length was not saved in PCE file
GO2SUP-3411

Simulation

Fixed, tool holders matrices in dynamic simulation
GO2SUP-3233

MTE

Display of steadyrest was not good when user wants to set at pick position.
GO2SUP-3232

2 Axis Milling

Plunge pocketing and contouring : fix management of approach and return point defined in the geometry selection.

GO2SUP-3216

Simulation

Fixed, issue with 'step by step' with MTE simulation containing XML commands
GO2SUP-3190

3X+2 Milling

Fix a problem in output with cycle repetition in 5 axis positionned. The machining plane was cancel in some case even if it doesn't change.
GO2SUP-3180

Wire EDM

Correction of compatibility in EDM for conical profile when open an old PCE file

Turning MTE

Synchro on toolpath : auto incrementation of synchro number when the synchro is apply on "all"

API JavaScript

Javascript: fix possible crashes when using GO2SMatrix object

Graphics

Display issue of copied toolpaths: subprograms now have correct boxes, and shouldn't be subject to clipping anymore
GO2SUP-3182

Solid Milling

Profile creation on bottom face : In some case the bottom radius was not read from solid. It as been improved.
GO2SUP-3136

Wire EDM

The wire edm licence had 2 mistakes: parallel profil and 4 axis machining menu were off. We fixed it.
GO2SUP-3092

GO2cam Operator

Fixed error of comparison regarding scallop in some operations

GO2SUP-3069

GO2cam Operator

Mistakes with MTE synchros are fixed.

Wireframe Design

Fix issue when creating relative points in polar coordinates

Wire EDM

A through pocket profile was not detected by Part Analysis, fixed.

Wire EDM

Part Analysis in Wire EDM: we fixed an issue of wrong recognition of profiles.

Turning

Turn Grooving: we fixed a bug of toolpath calculation that occured after changing the stock allowance value.
GO2SUP-3038

Probing

Fixed, using the grid to select probing positions, for part alignement and stock origins

GO2SUP-2978

Probing

The retract between touches was not done.
GO2SUP-2968

API JavaScript

Standard macro : Groove Type DIN509 was fixed for opposite and inside.
GO2SUP-2697

2 Axis Milling

Fix part/tool collision in pocket cycle
GO2SUP-2096

Simulation

In some cases of helix operation, the final constant toolpath was not simulate. It has been fixed.
GO2SUP-1245

Symbols

Improved positionning of symbols. Automatically sets angle if both trihedrons are not aligned.
GO2SUP-900

2 Axis Milling

We fixed toolpath display of certain cycle types with positionning in between moves
GO2SUP-729

2 Axis Milling

Gouge check of chamfering was not correct due to a wrong modelizing of tool: fixed.
GO2SUP-477

Geometry

Fix duplicated geometry when moving a solid and wireframe create from slice or silhouette.
GO2SUP-382, GO2SUP-1733, GO2SUP-1877

V6.11.203

Fixed Issues

23 of April, 2024

Topic

Issue

Machining Tree

We fixed an issue of machining tree disappearing in some situations
GO2SUP-2747

Solid Design

Fix in the persitency of solid while editing evolutive fillet
GO2SUP-3087

Par Positioning

The re-positioning of part was sometimes cancelled while reexecuting the project; it is fixed.
GO2SUP-2923

Holes

Fixed display of cut holes.
GO2SUP-2897

Workplanes

In the Status Bar, the planes names will always be displayed in full, regardless of their length
GO2SUP-2885

Wireframe design

When creating a relative point, X/Y coordinates are now always considered as relative
GO2SUP-2862

MTE

MTE Tooling menu : Fixed "optimum setting" command displayed errors.
GO2SUP-2840

NC output

Correction of NC output with MTE extra information. Sometimes, the value read in the machine was not good. It has been fixed.
GO2SUP-2791

User Interface

Techno functions: in the field 'seconds', we fixed an error occuring while using the scroll of mouse+
GO2SUP-2778

Standard Holders

We fixed a bug in the positioning of turning round shank
GO2SUP-2730

DXF Import

We fixed issues relative to hatchings
GO2SUP-2714

MTE

Machine creation : correct units are displayed when setting a rotary axis origin position

CAD Import

File import : correction to have asian characters even if the font is not installed on the computer.

Simulation

Fixed, dynamic simulation with C axis cycles
GO2SUP-2717

3X Milling

We improved the Finishing toolpath to bypass a Parasolid bug and avoid a collision with solid.
GO2SUP-2639

User Interface

Fix a graphic issue that occured while editing an operation and inverting the turn tool.
GO2SUP-2630

MTE

Fixed, removed an unwanted reset of the rotary axis that is no longer needed
GO2SUP-2617

Turning Design

Part Design in Turning: we fixed an issue in the calculation of through holes
GO2SUP-2548

Wire EDM

Fixed a bug about transparency option for 'Taper on Profiles' command
GO2SUP-2514

Solid Design

Separation on profile: fixed an issue regarding the solid display icon
GO2SUP-2507

Turning

Final return point of interior threading was missing.
GO2SUP-2502

Solid Design

We fixed an issue in creation of solid torus; the radius of section (radius 2) was not accessible for modification.
GO2SUP-2410

V6.11.202

Fixed Issues

27 of March, 2024

Topic

Issue

Turning

The option 'Positioning ins newly created plane' (in Tools>options>Display) was not considered when going from a turning to a milling tab. Now, by setting OFF the option, you can change menu without changing the view.

Solid Design

Fix solid face extend computation (issues in edges selection)
GO2SUP-2645

User Interface

We fixed an issue in the selection of holes by window box.
GO2SUP-2248

Milling

Contouring: icons were missing in the options of multiple lateral passes.
GO2SUP-2216

MTE

MTE simulation was fixed with multi tool holder.
GO2SUP-2131

3X Milling

Morphing operation : Correction to manage properly if several limitation are used. GO2SUP-2028

Milling

Opelists

We fixed an issue of a starting point of profile relative to an approach point
GO2SUP-1976

Wire EDM

Fixed, orientation of threading points or profiles is respected, while Z of point and Z of profile are different
GO2SUP-1965

Solid Design

Solid silhouette calculation was wrong in some cases: fixed.
GO2SUP-1574 GO2SUP-1979

3X Milling

In Roughing, the first pass did not start out of material, we fixed it.
GO2SUP-1489

Milling

We fixed a bug of toolpath discontinuity in the pocket cycle.
GO2SUP-1372

Symbols

Improved positionning of symbols. Automatically sets angle if both trihedrons are aligned.

Milling

Back Machining: fix of back depth calculation when using retractable bar