List of Commands - Wireframe Design

Point – Draw a point by entering a coordinate or by clicking a special point (extremity, midpoint, intersection…) It is also possible to click 2 entities to create their intersection point.

Relative point – Draws a relative point. Click the first point to define the origin, then click the position of point.

Coefficient Point – Draws a point on an entity. Click the entity then define the position of point (% or distance).

Midpoint – Draws a midpoint between 2 points, centers or extremities. Click each point to create the midpoint of the 2.

Line - Draw a line. Click 2 points on the screen. It is possible to click on existing entities to define constraints of parallelism, tangency or perpendicularity.

Center Circle – Draw a circle defined by its center and its radius.

2 Points Circle – Circle going through 2 pts defined: by their coordinate, by clicking a point (or intersection or extremity), by tangency.

3 Points Circle – Circle going through 3 pts defined: by their coordinates, by clicking a point (or intersection or extremity) by tangency.

Predefined Circle – Draw a circle by its center and predefined radius.

Segment - Draw a segment. Click 2 points on the screen. It is possible to click on existing entities to define constraints of tangency or perpendicularity.

2 entities Arc – Draws an arc constrained by entities. Click 2 entities and/or waypoints. Click a third point to indicate the shape chosen among the possible solutions.

Center Arc – Draws an arc by its center. Click a point to define the center. Then click a point to define the radius (and the first point). Click a third point to define the aperture angle of arc.

3 Points Arc – Draws an arc constrained by 3 entities. Click 3 entities and/or waypoints.

Tangent Arc – Draw an arc tangent on one extremity. Click an extremity then click a waypoint.

Curve – Draw a NURBS curve. Click the waypoints.

Rectangle - Draws a rectangle defined by 2 points. The 2 points represent a diagonal of the rectangle.

3 Points Rectangle - Draws a rectangle defined by 3 points. The 2 first points represent one side of rectangle; the third point defines the width (or length) of rectangle.

Center Rectangle - Draws a rectangle piloted by its center. Click a point to define the center. Then click a point to define half the length (or width). Click a third point to define half the width (or length).

3 Points Oblong – Draws an oblong by 3 points. The 2 first points define a side of the oblong, the 3ed point is the width (or length) of the oblong.

Center Oblong – Draws an oblong piloted by its center. Click a point to define the center. Then click a point to define a half length (or width). Click a third point for the half width (or length).

Ellipse – Draws an ellipse. Click 3 points to define its center, the major radius and the minor radius.

Helix- Draws an helix. Click 3 points to define the center, the starting point and the radius.

Polygon – Draws a polygon. Click 2 points to define the center and the radius.

Drawing - Adjusts the drawing by deleting the selected part, or by keeping it (SHIFT key)

Draw by following profile - Creation of a geometry by following unbounded elements

1 Distance Chamfer - Draws a chamfer defined by a distance

2 Distances Chamfer - Draws a chamfer defined by 2 distances.

1 Distance and 1 Angle Chamfer - Draws a chamfer defined by a horizontal distance and an angle

Fillet - This tool is used to round off the corners of a 2D shape.

Join - Join two entities. Click the 2 entities, they will be extended or trimmed in order to realize the junction.

Trim or Extend - Trim or extend an entity. Click the entity on the side to be adjusted. Define the new position of the selected extremity by clicking a point in the window or another entity.

Divide - Splits a geometric entity according to the given point or in the extension of the clicked segment.

Merge - Merge several contiguous geometric entities. The result is a NURBS curve.

Convert to Arc/Segment - Converts geometric entities into a succession of arcs and segments

Bisector - Draws a bisector between 2 entities.

Median curve - Draws a curve which is median to 2 entities or profiles

Drawing - Adjusts the drawing by deleting the selected part, or by keeping it (SHIFT key)

Draw by following profile - Creation of a geometry by following unbounded elements

Parallel Profile - Draws one or several profiles parallel to a selected profile.

Text - Enter the text in the command zone and position it clicking on the fly on the screen or on an element