Revisions - Fix for GO2cam 2026

2026.5

Fixed Issues

29 April, 2026

Turning

We fixed several issues in the pilot points computing of turning tools (parting, grooving, straight cut...).

For this, we renewed completely the pilot points topic.
GO2SUP-21294 / GO2SUP-23305

As a consequence, if you open files from versions V6.11 and before, you may face troubles in the MTE simulation for tools piloted with P point (while NC output will not change).

In that case, update machining to get a correct MTE simulation.

Wire EDM

Fix wire EDM Micro Arc converted into segment
GO2SUP-22595

Stock

Fixed, rapid stock picking being broken after a cycle computation.
GO2SUP-22810

Workplanes

We fixed issues of wrokplanes updates for parts from older versions
GO2SUP-23046

2X Milling

Pocket: fix issue of wrong computing of toolpath
GO2SUP-23209

2X Milling

Contouring by upwarding generated inverted rapid toolpaths, we fixed it.
GO2SUP-22808

Machining

Update of Machining: we solved an issue of software freezing while computing gouge check operation.
GO2SUP-23455 / GO2SUP-23600

3X Milling

Isoparametric: we fixed a computing issue.
GO2SUP-23210

Export to NCsimul

When exporting to NcSimul, a crash occured if the output directory didn't exist. Now the directory is created if it is missing

Workflow

At stock creation step, the keep entity option for solid did not work before 2026.5.
GO2SUP-22357

Machining

Machining Labels: Fixed, correct frame for machining labels / Changed, lighter unselected labels in dark mode
GO2SUP-22162

NC Output

In a very specific situation, output of NC file was freezing the software, we fixed it.
GO2SUP-22006

Simulation

Fixed, toolpath simulation with rotation subprograms
GO2SUP-21641

Safety Area

We fixed issues occuring with Sphere-type area. Also the behaviour is modified : the sphere mode is not anymore a full sphere but an hybrid shape with a half-sphere on top and cylinder on bottom.
GO2SUP-21621

Turning

Stock is now computed for a point to point operation.
GO2SUP-19945

Export to Vericut

Fix export tapping tool to Vericut 9.6.2
GO2SUP-18084

2026.4

Fixed Issues

02 April, 2026

MTE

We have added a warning for unreachable angles. This warning gives you the delta angle value that must be set in the tool to allow the machining.
GO2SUP-21725

MTE

Fixed, work holding device properly set in MTE.
GO2SUP-20582

Workplanes

Fixed, invalid planes reexecution
GO2SUP-20433

3 Axis Milling

Isoparametric: Stop Face was not taken into account by toolpath, we fixed it.
GO2SUP-21138

Simulation

Fixed, Developped plane toolpath simulation
GO2SUP-21549

CAD Interfaces

STEP Export: Fix export of solid that were created in a plane different from Reference plane
GO2SUP-21334

Workplanes

Computing Update: some error messages used to appear because of workplanes computing; we will not display those useless messages anymore.
GO2SUP-21226

Workshop Doc

Tool holder names are now in the tool description for Excel standard documentation.
Also, images were not exported, we fixed it.
GO2SUP-21015

Milling

Wrong Rapid Motion: we manage correctly the tool pilot point when a Hole direction is not Z axis (0,0,1)
GO2SUP-19245

Profiles

Fix a bug of selection of wireframe elements
GO2SUP-21508

Export

Fix Stl export for Vericut of tool holder that are revolution shape.
GO2SUP-18607

MPM

Allow to have cycle with different planes when all planes have the same normal (read part with Machining planes)
GO2SUP-16628