Pocket Morphing

The Pocket Morphing cycle is a pocket cycle with evolving trajectories depending on the selected reference profile and the solid. The trajectories will gradually adapt from the selected profile to the shape of the part.

A reference profile corresponding to the pocket must be defined. So that the trajectories are generated inside and from it, evolving relative to the surfaces of the pocket. Machining will be from the center to the profile or vice versa.

Dialog Area	Parameters
Toolpath Strategy	Machining direction	Machining Method
Toolpath Strategy	Path direction
Definition of Machining Area	Machining Area/Reference	Offset type
	Machining of the defined area	Width machined
	Offset on drive profile
Stepover Calculation	Stepover (Tool ratio)	Stepover value (Ae)
Stepover Calculation	XY Scallop
Allowances	XY Stock allowance	Z Stock allowance
Allowances	Normal stock allowance

Dialog Area	Parameters
Safety (in Z)	Rapid plane alt.	Safety distance
Approach and return in Z	Retract altitude
Safety (in XY)	SD/ Tool shank	Management of toolholder
Leadin and leadout in XY	Lead in length	Lead out length
	Lead in arc radius	Lead out arc radius
	Leadin radius angle	Leadout radius angle

Dialog Area	Parameters
Cutting Conditions	Quality	Cutting Speed
	Feedrate/tooth	Spindle direction
	Spindle speed	Feedrate
	Sp. speed range	Plunge feed
	Specific coolant	Coolant number
Tool Numbering	Tool number	Specific Number
Tool Numbering	Length compensation number	Diameter compens. Nb
Users Fields	Comment	Control Device
Users Fields	Milling Set

Dialog Area	Parameters
Behaviour on the clamps and components	Gouge Check	Offset XY
Behaviour on the clamps and components	Safety area	Offset Z
Curves Computing	Curve tolerance	Curve segmentation

Key Points

Strategy Parameters

Movement Parameters

Technology Parameters

Options Parameters