Skip to main content
Skip table of contents

3X Deburring

This operation removes burrs and excess material with a 3 axis toolpath.

Key Points

  • This cycle is automatic: just click the solid and the edges will be recognized.

  • You can also select a set of edges; please read the advise of selection below.

  • You can define your own settings for the edges detection, and also exclude edges from toolpath.

  • These 3 types of tools can be used:

    • Ball End Mill

    • Taper Milling Cutter

    • Lollipop Cutter

Edges always belong to 2 faces. One major information in the selection of edges is to select all the faces that the edges belong to!

On the left side, we select only the top face, which is not enough! The selection must be done with all lateral faces.

selection1.png
selection2.png
selection3.png

You can download a sample including operations with 3X deburring and 5X deburring

3X-5X-deburring.GMZ

Strategy Parameters

Dialog Area

Parameters

Expert Option

Movement Parameters

Dialog Area

Parameters

Approach and return in Z

Rapid plane altitude

Safety distance

Rapid Retract

Technology Parameters

Dialog Area

Parameters

Cutting Conditions

Quality

Cutting Speed

Feedrate/tooth

Spindle direction

Level

Spindle speed

Feedrate

Plunge feed

Sp. speed range

Specific coolant

Coolant number

Tool Numbering

Tool number

Specific Number

Length compensation number

Diameter compens. Nb

Users Fields

Comment

Control Device

Milling Set

Options Parameters

Dialog Area

Parameters

Behaviour on the clamps and components

Gouge Check

Offset XY

Safety area

Offset Z

Curves Computing

Curve tolerance

Curve segmentation

▶️ You can watch a video showing 2 examples of the 3X deburring cycle:

3 axis deburring cycle.png

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close