Pecking

Operation to break angles done with a single toolpath.

Key Points

The selection of the geometry is very simple: click one point.

the angle of pecking is determined by the insert angle on the tool page,

the depth is defined in the strategy page.

Pecking Photo 1.jpg

Pecking Photo 2.jpg

Strategy Parameters

Dialog Area	Parameters
Toolpath	Pecking	Step Depth
	Chip breaking retract	Dwell
	Pilot	Type of Machining
Machining Strategy	Machining depth	1st rapid retract
Machining Strategy	Final dwell	Dwell unit

Movement Parameters

Dialog Area	Parameters
Approach and Return Characteristics	Safety distance in Z	Safety distance in X

Technology Parameters

Dialog Area	Parameters
Cutting Conditions	Quality	Cutting Speed
	Spindle speed	Speed range
	Feedrate in Z	Feedrate
	Spindle direction	Maxi spindle speed
	Coolant number	Specific coolant
Tool Numbering	Tool number	Specific Number
Tool Numbering	Radius compensation number	Length compens. nb
User information	Comment	Control Device
User information	Machining Set

Options Parameters

Dialog Area	Parameters
Management of collisions	Gouge check on stock	Offset XY
	Safety Area	Offset Z
	Safety distance in Z for rapids	Safety distance in X for rapids
Curves Computing	Stock to keep