Cycle: All Standard Cycles, All Manual Cycles
Definition
Definition of the return movements.
Six possibilities are offered, they are explained in the following examples.
A : Rapid plane
B : Safety distance
C : Altitude (altitude defined in the selection dialog box)
D : Geometrical altitude
|
Rapid motions |
|
Feedrate motions |
|
Altitude + SD |
Rapid plane |
Depth + SD |
|
|
Use this option only when the altitude is selected, by clicking on the geometry. |
|
Without retract |
Direct altitude + SD |
Altitude + SD, rapid plane |
The tool stays at the altitude of the last pass. |
|
|